Sewing projects like this can be so much fun and it saves so much money. Here are two different techniques for sewing, to sew a lined tank top.
Reversible tank tops are so versatile. Taking perfectly, when you are out. You will receive a 2 for 1 above, if you use a different color for the coating. You can even 4 to 1 with 4 different color fabrics. . . 2 colors for 2 front and 2 colors for 2 back. This works great under jackets, because only the front of mind whenwear it.
Test for the first show. It 'a great way to use that many of your stash!
Cuttings can also be different front and rear, if desired. Try sewing a front V-neck and a bullet to the neck back. If you do not have the arrows to the chest, you can wear a back up for another look.
That both techniques for sewing find out what you like best.
Method I - Sew a Binding to the neck and armholes
Directional, necklines and armholes help staystitchprevent them from stretching.
In other words, point 1 / 2 "from the edge of a single layer
Material from the shoulder back toward the center front and center
on the cut.
Staystitch from the shoulder to the forearm on the sleeves.
Staystitch the bottom of the container 1 / 4 "from the edge of the front and rear on both levels.
Join shoulder seams
Provide a front and back with 2 right sides together.
Stitch the shoulder seams from the neckline toChannel.
Repeat layer coating.
Sandwich press the seams of the shoulders.
Press the seams open.
Cut the lining shoulder seams to 1 / 4 "
Stitch side seams
Sew side seams from bottom to the forearm at both levels.
Sandwich press the seams.
Press the seams open.
Cut the lining side seams to 1 / 4 ".
Try On To Fit Check
Before you sew the two layers, try the top of the tank to see if the cut orArmhole gap. If they do, it is time to correct or too complicated with darts, loosening or cutting or other adjustment sleeve here.
Sewing Tip: Use a tape fuse stay neckline and armholes to eliminate problem gaposis.
Once you form your body to do the same adjustments for the food.
Put together tank top and lining
Put together the 2 wrong sides of the tank top and lining.
Pin the shoulder seams onthe other to hold in place at the neckline and the shoulder point.
Line up and pin together at the underarms.
Pin center fronts and center backs together at the neckline
Pin the armholes together
Beginning at a shoulder seam, stitch the neckline 5/8" to 3/4" from the edge.
Trim off the seam allowance close to the stitching. This edge will be bound and will be the finished edge of the garment.
Stitch the armhole seams 5/8" to 3/4". Trim off the seam allowance close to the stitching.
Now the neckline and armhole edges are ready for binding.
Sewing Tip: You might like to try serging the edges with a
decorative thread or look for a decorative purchased trim to bind them. You are the designer.
Cut Fabric Binding
For a fabric binding, cut matching or contrasting bias binding to go around the neckline and both armholes 4 times wider than you want the finished binding to be.
That is, if you want 3/8" finished binding, cut the bias 1-1/2" wide and the length you need it to be.
Test the width of bias on scraps of your garment and lining fabric (double layer) to make sure you have enough width for the "turn of the cloth".
Sew Binding
Sewing Tip: Use fusible thread in the bobbin of your sewing machine to sew the binding to the neckline and armholes.
Lay the right side of the binding against the right side of
the tank top with the raw edges together.
At the beginning of the binding, fold back the raw end.
Place this fold at one of the shoulder seams for the neckline. You may start the binding at the center back if you prefer, however, if you plan to wear the tank backwards, it may look better to have the binding end at one shoulder.
Place the fold to start the binding at the underarm for the
armholes.
Stitch the binding as deep as you want it to be when finished. Example: 3/8". Slightly stretch the binding as you stitch a curve.
Overlap where you started the binding and trim off the excess. The folded edge of the binding will show when the binding is finished.
Turn the bias up over the garment edge, fold under and pin.
Lightly press to fuse the binding to hold it in place.
Either slipstitch the edge of the binding so the stitches won't show from either side or "stitch in the ditch" or "well stitch" on the right side with the stitches showing on the lining side.
Note: The fusible thread is not enough to hold the binding
permanently. You must stitch it.
If you aren't going to wear the tank top inside out, just leave the raw edge of the binding on the inside and "stitch in the ditch". It eliminates bulk. Since it is bias, it won't fray.
Hemming Options:
Hem the two layers separately. Hem the outside layer first.
Let it hang a while. Try on the garment and mark where the lining should be hemmed. Then hem the lining layer so that it doesn't show.
Note: If the garment is not reversible, hem the lining a little shorter than the garment. If the garment is reversible, you want both layers the same length.
Hand sew a small "swing tack" at the bottom of the side seams to keep both layers together.
Optional: You can stitch both layers together at the bottom and bind it, too.
Another Option: Or, bring the 2 right sides of the bottom of the garment and lining together and stitch leaving about a 4" opening near a side seam to turn the tank right side out.
Slipstitch or fuse the opening closed.
Method II - Create a Center Back Seam For More Choices
This is another favorite sewing technique for sewing a lined
tank top. This method requires either a center front or center back seam in the garment. It is the same technique often used for a reversible or lined vest.
If you don't want a plain seam line down the center of your tank, then turn it into a pleat or tucks or some other design element on the garment. Be sure to allow extra fabric for the center seam plus the pleat, pintucks, etc.
How To Add For An Inverted Pleat
Here is an example of how to add for an inverted pleat. This
pleat folds toward the seam line and helps to hide it. You can add decorative or top stitching or trim, etc. to the pleat if desired. You are the designer. Do whatever suits your fancy. Get ideas from ready-to-wear.
For a 1" inverted pleat down the center back or center front of a tank top, you need to add double the pleat (2") plus a seam allowance (5/8"). That adds up to 2-5/8" total that you need to add to the center front or center back fold line in order to make a 5/8" seam and have a 1" pleat.
You might also like the seam exposed as the focal point of a box pleat and run a row of trim or buttons down the seam line. Just fold the pleat to create a box pleat instead of an inverted pleat.
How To Sew The Tank Top
Directionally staystitch the necklines and armholes on both layers to prevent stretching as specified in Method I.
Stitch the shoulder seams on both layers. Press and trim as in Method I.
Do NOT make the center seam. For our example, we will use a center back seam.
Put the 2 right sides together of the tank and the lining together
Stitch the armholes, trim and understitch. Use short stitches (18-20 per inch); trim to 1/8" and understitch.
For the neckline, beginning on the back about 2" before the
shoulder seam, stitch around the neckline and stop 2" beyond
the other shoulder seam.
Trim seam and understitch. Use short stitches to stitch a curve (18-20 per inch); trim to 1/8" and understitch.
Leave the back neckline unstitched until after you make the seam and pleat in the center back. It is fine for now.
Turn Right Side Out
Now, pull the split unstitched right and left backs through each shoulder to turn right side out.
Press the stitched neckline and armholes well with understitching up at the board.
Stitch Center Seam
Stitch the center seam at 5/8". Sandwich press. Press seam open.
Mark Pleat
With the face side up, mark fold lines 2" away from either side of the seam line. Bring those lines over to the seam line and press the pleat in place.
You can stitch 1" from the marked fold if desired.
Repeat for the lining.
Finish Back Neckline
Now, finish the back neckline. Stitch with short stitches, trim, understitch, press.
Shoulders, neckline, and armholes are finished.
Sew Side Seams
Lay the right sides together for both the garment and the
lining.
Pin the underarm seams one on top of the other matching exactly.
Start at the bottom of the garment and stitch in a continuous seam up to the armhole, stop, walk your sewing machine over the pin, and keep stitching down the lining side seam.
Sandwich press the seam.
Press the seam open.
Do not trim this lining seam in case you need to let the garment out.
Turn the lining layer down inside the garment.
Finish The Bottom
Finish the bottom as described above with either separate hems, or. . .
Stitch the two layers together leaving an opening near a side seam and turn right side out.
Design Your Own Tank Style Garments
Change your necklines, add slits to the side, or lengthen
the tank top pattern for tunic, knee length, or floor length. Just make sure to allow room for hip width plus ease.
Perfect the fit on your tank top sewing pattern. Use it to sew blouses, dresses, beach cover-ups, night gowns, vests and sleeveless jackets.
Sew a whole wardrobe using different fabrics like silk, lace, fleece, leather, suede, denim, upholstery fabrics, sheers, cottons, knits, quilted fabric, whatever you want.
Add decorative stitching, appliques, embroidery, fabric manipulation; try out all your sewing techniques, paints, etc.
Have fun designing your own unique tank wardrobe. They are
quick and easy sewing projects.
It just makes sense!
sleepless